EXPLORE.PERSIST.MASTER.
Cisco Certified Network Associate (CCNA) Training.
Share :
+971 43346660
CCNA Certification is an associate level certification provided by Cisco, the latest certificate which consolidates all the former CCNA certificates (such as Routing and Switching, Security, Datacenter, Service Provider and Wireless) under one single roof. It covers a broad range of entry-level networking and security skills with one comprehensive exam. The course involves learning how to install, configure and manage basic IPv4 and IPv6 networks. It also covers configuration and management of network devices such as switches, routers and wireless LAN controllers, and provides a base in network programmability, automation, and software-defined networking.
IP Rulers is the new face of CCNA Certification and Training in Dubai, UAE, which provides both online and classroom-based training in the latest cutting-edge fundamental technologies in the IT sector. With grouped as well as one-to-one classes and online tutorials that could be scheduled for weekdays or weekends in accordance to the students’ choice, IP Rulers is fast becoming a leading name in Dubai in providing a highly valued Cisco Certificate, with a 100% pass rate on the first attempt. The CCNA course lays the foundation in IT infrastructure and networking, and keeps the candidate in touch with the dynamic technologies in the field, all with the help of IP Rulers.
Target Audience:
The CCNA certification provides basic fundamental knowledge involved in the installation, operation, and verification of Cisco networks. Therefore, this course serves best the aspirants in the following job roles:
- Network administrator
- Professionals in the IT and related technologies sector
- Network support technician
- Help desk Engineers
- IT students and graduates
Prerequisites:
Candidates taking the CCNA course should be versed in
- Basic computer literacy
- Basic PC operating system navigation skills
- Basic Internet usage skills
- Basic IP address knowledge
- Good understanding of network fundamentals
- Experience in implementing and administering Cisco solutions.
- Knowledge of basic IP addressing.
- Sound understanding of network fundamentals.
- Deep-rooted skills required to install, configure, and operate a small- to medium-sized network.
- Basic foundation in the essentials of networking, security, and automation.
- Increased job opportunities with better payments.
CCNA certified candidates will have employment opportunities with the following job titles:
- Level 1/2 Network Engineer
- Level 1/2 Network Administrator
- Level 1/2 Network Support
- Level 1/2 Network Consultant
- Level 1/2 Technical Consultant
Duration
40 Hours
Skill Level
Beginner
Certificate
Yes
Modules
6
Language
English
Mode
Online/Offline
Key Highlights
- Live Instructor-Led Training (Online & Classroom)
- 40 Hours of Technology Lectures
- Weekdays (Tue - Fri)
- Weekend (Fri-Sat or Sat-Sun)
- SD-Access Lab (DNA center with 9300 series switch)
- Cisco Catalyst SD-WAN Lab (Cisco Viptela Infra)
- Real Equipment and Real World Live Scenarios
- Exam question bank and Preparation
Key Highlights
- 100% Pass Guarantee
- 24/7 Access to the Learning Resources
- Hands-on Lab Practice on physical equipment
- Demand-driven recorded video lectures for references
- Flexible Installment Plans
- Boot Camp Training for a Fast Track Learning
- The Only Center in the UAE with SDN Lab Infra
- Eve-ng Set up on the laptop with images
Course Curriculam
1.1 Explain the role and function of network components
- Routers,
- L2 and L3 switches
- Access points&Controllers
- Cisco DNA Center
- WLC
- Next-generation firewalls and IPS
- Endpoints&Servers
1.2 Describe characteristics of network topology architectures
- 2 Tier
- 3Tier
- Spine-leaf
- WAN
- SOHO (Small office & Home Office)
- On premises & Cloud
1.3 Compare physical interface & cabling type
- Single mode fiber, multimode fiber, Copper
- Concept of POE
1.4 Identify interface and cable issues
- Collisions
- Errors
- mismatch duplex
- speed
1.5 Compare TCP to UDP
1.6 Configure & Verify IPv4 addressing and subnetting
1.7 Describe the need for private IPv4 addressing
1.8 Configure and verify IPv6 addressing and prefix
1.9 Compare IPv6 address types
- Global unicast
- Unique local
- Link local
- Anycast
- Multicast
- Modified EUI 64
1.10 Verify IP parameters for Client OS
- Windows
- Mac OS
- Linux
1.11 Describe wireless principles
1.12 Explain virtualization fundamentals (virtual machines)
1.13 Describe Switching Concepts
- MAC learning and aging
- Frame switching
- Frame flooding
- MAC address table
2.1 Configure and verify VLANs (normal range) spanning multiple switches
- Access ports (data and voice),
- Default VLAN,
- Connectivity
2.2 Configure and verify interswitch connectivity
- Trunk ports
- 1Q
- Native VLAN
2.3 Configure and verify Layer 2 discovery protocols
- CDP
- LLDP
2.4 Configure and verify (Layer 2/Layer 3) Ether ChannelusingLACP
2.5 Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol and identify basic operations
- Root port, root bridge (primary/secondary), and other port names
- Port states (forwarding/blocking)
- Port Fast benefits
2.6 Compare Cisco Wireless Architectures and AP modes
2.7 Describe physical infrastructure connections of WLAN components
- AP
- WLC
- Access/Trunkports
- LAG
2.8 Describe AP and WLC management access connections
- Telnet
- SSH
- HTTP/ HTTPS
- Console
- TACACS+/RADIUS
2.9 Configure the components of a wireless LAN access for client connectivity using GUI only
- WLAN creation
- security settings
- QoS profiles
- advanced WLAN settings
3.1 Interpret the components of routing table
- Routing protocol code
- Prefix
- Network mask
- Next hop
- Administrative distance
- Metric
- Gateway of last resort
3.2 Determine how a router makes a forwarding decision by default
- Longest match
- Administrative distance
- Routing protocol metric
3.3 Configure and verify IPv4 and IPv6 static routing
- Default route
- Network route
- Host route
- Floating static
3.4 Configure and verify single area OSPFv2
- Neighbor adjacencies
- Point-to-point
- Broadcast (DR/BDR selection)
- Router ID
3.5 Describe the purpose of first hop redundancy protocol
4.1 Configure and verify inside source NAT using static and pools
4.2 Configure and verify NTP operating in a client and server mode
4.3 Explain the role of DHCP and DNS within the network
4.4 Explain the function of SNMP in network operations
4.5 Describe the use of syslog features including facilities and levels
4.6 Configure and verify DHCP client and relay
4.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping
4.8 Configure network devices for remote access using SSH
4.9 Describe the capabilities and function of TFTP/FTP in the network
5.1 Define key security concepts
- Threats
- Vulnerabilities
- Exploits
- Mitigation Techniques
5.2 Describe security program elements
- user awareness
- training
- physical access control
5.3 Configure device access control using local passwords
5.4 Describe security password policies elements
- Management
- Complexity
- password alternatives
- multifactor authentication
- certificates
- biometrics
5.5. Describe remote access and site-to-site VPNs
5.6 Configure and verify access control lists
5.7 Configure Layer 2 security features
- DHCP snooping
- dynamic ARP inspection
- port security
5.8 Differentiate authentication, authorization, and accounting concepts
5.9 Describe wireless security protocols
- WPA
- WPA2
- WPA3
5.10 Configure WLAN using WPA2 PSK using the GUI
6.1 Explain how automation impacts network management
6.2 Compare traditional networks with controller-based networking
6.3 Describe controller-based and software defined architectures
- Overlay
- Underlay
- fabric
6.3.a Separation of control plane and data plane
6.3.b North-bound and south-bound APIs
6.4 Compare traditional campus device management with Cisco DNA Center enabled device management
6.5 Describe characteristics of REST-based APIs
- CRUD
- HTTP verbs
- Data encoding
6.6 Recognize the capabilities of configuration management mechanisms
- Puppet
- Chef
- Ansible
6.7 Interpret JSON encoded data
lab infrastructure.
CCIE enterprise infrastructure v1.1 equipment and software list:
The practical exam tests candidates on solutions that can be configured using the below
Equipment and software versions. Candidates may see more recent software versions
during their attempt but will only be tested on features that are supported in the list below.
Passing the exam requires a depth of understanding difficult to obtain without hands-on
experience. Early in your preparation you should arrange access to equipment and soft-
ware similar to that used on the exam.
Virtual machines
- Cisco Catalyst 8000V Routers with Cisco IOS XE Software Release 17.9
- Cisco IOSv with Cisco IOS Software Release 15.8
- Cisco IOSv-L2 with Cisco IOS Software Release 15.2
- Cisco SD-WAN (vManage, vBond, vSmart, cEdge) Software Release 20.9
- Cisco DNA Center, Release 2.3
Physical Equipment
- Cisco Catalyst 9300 Switches with Cisco IOS XE Software Release 17.9 Other (supporting virtual machines)
- Cisco Identity Services Engine 3.1
- Linux Desktop
Topology
Modes Of Training
We provide various modes of training, each catering to different learning styles, preferences, and needs.You can make your choice of training mode.
- Classroom-Based Training
- One-On-One Training
- Online Training
- Corporate Training
- Fast Track Training
- Private Group Training
- Lab Workshop Training
Instructors
Krishna kumar
Senior Trainer
CCIE R&S, MCSE
He has been in the networking industry for more than 25+ years, with a focus on Automation and Scripting. Krishna, a CCIE Certified instructor has worked in different IT firms and well known with his experiences that could help pursuing students to accomplish their goal. At present, he is delivering training to students in achieving their certifications in Cisco, Microsoft and Automation.
CCIE Enterprise Infrastructure
Vivek has over 5 years of experience in consulting and giving training to IT professionals to obtain their certifications in Cisco & CompTIA. Designed, developed and delivered online and classroom training for the corporate professionals.
Vivek Gunasekaran
Senior Technical Instructor
